Basic Info.
After-sales Service
Always Support on Market,Certificate,Samples
Environmental Standard
E0
Thickness
9mm,12mm,15mm,18mm,24mm,30mm,40mm
Length
1000mm,1200mm,1500mm
Sanding
150 or 180 Grit Sanding
Finger Joint
Top Finger ( Micro Finger Finger - Finger Blade 4m
Grade
A/A Grade,a/B Grade,B/B,B/C Grade
Species
Radiata Pine.Beech Natural,Oak,Maple,Ash,Cherry
Types
Finger Joint Panels,Egp Without Fj
Finger Joint Position
on Face or on Lateral
Micro Finger Joint
Finger Blade Size 4mm
Surface Treatment
Non Finished,Single ,Semi-Glossy,Highlights,White
Thickness Tolerance
<0.1mm
Width/Length Tolerance
<0.2mm
Transport Package
by Pallets
Specification
1220*2440mm, customized
Product Description
>>Edge Glued Panel Description
Species:
-Radiata pine
- Beech natural (not steamed)
- Beech (steamed)
- Beech red heart (rustic)
- European Oak
- European Maple
- Ash tree
- Cherry natural or steamed
- Black locust (acacia) steamed
- Whitebeam
Types and dimensions
- Finger jointed panels (from finger-jointed hardwood staves, same lamella's width on a board)
- Solid wood panels (made from strips, approx. random width 40-100mm)
Finger jointed panels:
- Thickness: 18/19/20, 26/27, 38/40, 43 mm or customized
- Lengths: up to 4600mm
- Widths: up to 1300 mm
Glued panels with solid staves:
- Thickness: 18/19/20, 26/27, 38/40, 45mm or customized
- Lengths: Furniture boards up to 2500mm, stair treads and raisers 900-1800mm
- Widths: up to 1300mm
Grading
A/B grade - Furniture grade
- Side A (face side): clean, no red heart (beech wood), free of knots, and discolorations, consistent structure, and color, oak without sapwood
- Side B (bottom side): no red heart, free of knots, natural stains, oak with some sapwood.
B/B grade
- Side A: small strips of red heart allowed (beech wood), free of knots, natural discolorations, sapwood strips allowed for oak
- Side B (bottom side): red heart allowed, small pin knots, natural stains, sapwood allowed for oak, putting allowed.
B/C grade
- Side A: small strips of red heart allowed (beech wood), free of knots, natural discolorations, sapwood allowed for oak
- Side B (bottom side): red heart allowed, small knots, natural stains, sapwood allowed for oak, putting allowed
C/C grade (red heart panels)
- Side A: beech naturally colored, sound red heart decoratively wanted, discolorations allowed, knots and mineral strike.
- Side B (bottom side): beech naturally colored, sound red heart decoratively wanted, discolorations allowed, knots and mineral strikes, putting allowed.
Edge glued lumber panels are an important component of many high quality furniture designs.Edged glued panels may be used for exposed furniture parts (such as doors), face glued intonsquares for turning or used as core material for hardwood plywood. In any case,
it is imperativenthat the panels be manufactured with strong glue bonds, closed joints, smooth surfaces, and be free of cup and warp.
Product Name | Solid Wood Edge Glued Board |
Model Number | CFPC-EGP-001 |
Material | pine |
Mainly Material | paulownia, fir, pine, poplar, birch, spruce |
Color | Natural Wooden Color or Bleached |
Grade | AA, AB, BB, BC |
Density | 300-350KGS/CBM |
Moisture Content | 6%-12% |
Thickness | 3-55mm |
Size | 1220*2440 or as customized |
Delivery time | shipped in 15-25 days after payment |
Payment term | TT/LC |
Certificate | ISO9001, FSC, BV |
Feature | stable and solid , natural twxture , green and evirmment protection, excellent hygrosscopicity adn are permeability |
Packing details | 1) Inner Packing:Pallet is wrapped with a 0.2 plastic paper.
2)Outer Packing:Pallet is covered with plywood or carton and then steel tapes for strength. |
necessary for quality panels.
Proper manufacturing techniques are essential for quality edge glued panels. To insure proper techniques are followed, a structured quality control program must be in place,the most important manufacturing concerns related to achieving quality panels and offers suggestions for designing a quality control program. The manufacturer must take this information and design a program which best fits their process needs and concerns. Equally important is that the manufacturer monitor and maintain their manufacturing equipment. Broken clamps, worn bearings, missing machine parts, and poorly adjusted machines are
common causes of poorly manufactured panels. The cost of neglecting equipment is high. Likewise, manufacturers should seek advice from their adhesive
suppliers and equipment manufacturers. Many companies offer good technical support and educational materials as a service to customers. Much can be learned from the experiences of those who deal with similar problems on a daily basis.1. Quality edge glued panels cannot be manufactured from improperly manufactured lumber.
The lumber must be dried to a moisture content appropriate for the environment of its intended end-use (6-8% ). 2.Machining of Panel Components Panel components must be machined properly to achieve a quality panel. Machined parts must be straight,have parallel and square edges, and surfaces of good quality.
3.It is also important that the edges are machined square. When edges are not square, a gap occurs along one edge of the glue line. When this gap is on the face of the panel (in view of the operator), the operator will often apply extra pressure to force the components together.4.It also important the surfaces to be glued are of good quality. Surfaces should be smooth with no burnishing, fuzziness, or deep tooth marks. Burnished surfaces do not allow for good glue penetration and thus weak glue bonds are formed.
5.Finally, components should be glued together shortly after machining. Components in storage can get dirty and pick up moisture, both of which affect glue bond performance.6.Gluing and Clamping Components must be properly glued to achieve a quality panel. It is important the proper glue formulation be used for the species, plant conditions, clamp cycle, and target moisture content of the components. If a new species of wood is to be glued,>>Our Solid Wood Furniture
>>Contact with us To Get :
1.Free sample
2.Complete catalog
3.Marketting consult service
4.Import logs
5.Customize your project
6.Design your furniture
Tap below link and send us your message :https://mdfosbplywood.en.made-in-china.com/contact-info.html
Address:
Room 2402, Zhongnan Jinshi International Plaza, 157 Jinggangshan Road, Huangdao District, Qingdao, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Construction & Decoration, Furniture, Toys
Management System Certification:
ISO 9001, GMP, FSC
Company Introduction:
Shandong National Forest Products Co., Ltd, is a state-owned enterprise, affiliated to China National Forest Products Cooperation(CFPC), with the investment amount about 300million RMB. Covering an area of over 80, 000 square meters with more than 200 employees.
We can supply various of wood products including: Film Faced Plywood, Birch Plywood, Marine Plywood, Melamine MDF, Venner MDF, Chipboard, OSB, Door Skin and Blockboard etc. All the products can be customized as your specific requirements, OEM&ODM is available. All the products can fully meet international standards such as FSC, ISO9001, CE and CARB etc.
As a 30+ years experience professional manufacturer and exporter in wood products field. We have hundreds of partners and 1000+ million business volume. We have 10+ standardized production lines with monthly production capacity above 85, 000 cubic meters.
"Eco-Friendly products & sustainable development for a better life". Welcome friends from all over the world to joint us and achieve a long-term win-win cooperation.
){kind=link}